Protective polyethylene pipe fittings & primer

2. Protective Tape
Protective tape ( outer tape) : Polyethene is used as the base material which is coated by the liquid butyl rubber film, both of which are pressed and compounded. The film of protective tape is thicker and higher in intensity. Protective tape will protect the pipe and its anti-corrosion tape surface from damages.
Type Color Thickness Width Length USE
T-240 Black, White 0.4 50 75 30 45 Mainly used in underground, submarine and overhead pipe line.
T-255 Black, White 0.55 100 150
T-265 Black, White 0.65 230 300 60 120
3. Joint Wrap Tape
Joint wrap tape: Polyethene is used as the base material which is coated by the liquid butyl rubber film, both of which are pressed and compounded. Usually its pe film is thinner than the one of anti-corrosion tape while the adhesive layer is much thicker. Joint wrap is used on pipe joints, fabrications, bends, fittings and tie bars.
Type Color Thickness Width Length USE
T-360 Black 0.6 50 75 30 45 Mainly used in pipe joints, fabrications, bends, fittings and tie bars.
100 150 230
T-380 Black 0.8 60 120
4. Primer
Primer: black adhesive which is composed of butyl rubber, resin, anti-ager, anti-oxidant, it is coated on the cleaned pipe steel surface.
Type Solid content ( kg/ can) USE
P19 19 12.5 20 Besmear in the surface of the steel tube that already get rid of rust, to boost up the combine between adhesive tape and steel tube
P27 27 12.5 20